Technical
Product 30W Amp 150W Amp
Network Bandwidth 100M 100M
Input 1x MIC/LINE IN [Balanced/unbalanced] 1x Dante Network audio input; 1x LINE balanced stereo 0dBu/10kΩ input
Output 1x LINE OUT; 1x 4/8Ω AMP OUT 1x Dante Network audio output; 1x Stereo or constant voltage 70V/100V speaker output; 1x LINE balanced stereo output
Input Sensitivity -35dBV, -18dBV, 0dBV, 4dBu, 14dBu, 24dBu Full power @ 0.775V (0dBu)
Input Impedance 20K Ohm balanced; 10K Ohm unbalanced 10kΩ
Input Level Max 24dBu (12.28Vrms) @ balanced line audio; Max 18dBu (6.14Vrms) @ unbalanced line audio; Min -35dBV (17.78mVrms) @ balanced mic audio Max input level 2VRMS
Output Power 2x15W @ 4/8Ω Stereo; 1x30W @ 4/8Ω Mono 2x75W @ 4Ω/8Ω; 1x150W @ 8Ω; 1x150W @ 70V/100V
Max Voltage Gain -35dBV 27–30dB SE / 39–42dB BTL
Output Impedance 600 Ohm balanced; 300 Ohm unbalanced 300ohm
Output Level Max 2V RMS @ balanced audio; Max 2V RMS @ unbalanced audio LINE OUT: Max 2VRMS; 4/8Ω AMP OUT: Max 24.5VRMS; 70V/100V AMP OUT: Max 100VRMS
Amplifier Type Class D Class D
Frequency Response 20Hz to 20kHz (-/+0.5dB) 20Hz–20kHz @ ±3dB
Dynamic Range >100dB @ 0dBu, 1kHz A-weighted 97dB
Signal to Noise Ratio >100dB @ 0dBu, 1kHz A-weighted 87dB, 20Hz–10kHz
THD+N < 0.01% at +4dBu, 1KHz 0.04% (1KHz @ 1W)
Audio Latency Dante device latency: 2, 3, 4, 5 or 10ms; AMP/analogue output latency: 0–50ms 5ms
Audio Formats Dante/AES67 digital audio in/out, PCM 2CH 44.1K–96kHz 16/24Bit
LINE IN: Analog audio, Balanced/unbalanced, Max input level 24dBu
MIC IN: Analog audio, Balanced/unbalanced, Min input level -35dBV
LINE OUT: Analog audio, Balanced/unbalanced, Max output level 2V RMS
AMP OUT: Analog audio, Balanced 2CH, Max output power 2x15W @ 4/8Ω Stereo, 1x30W @ 4/8Ω Mono 		LINE IN: Analog audio, Balanced 2CH, Max input level 2VRMS
LINE OUT: Analog audio, Balanced 2CH, Max output level 2VRMS
DANTE: Digital audio 2×2 in/out, PCM 2CH 44.1K–96KHz 16/24Bit
AMP OUT: Analog audio, Balanced 2CH, Max output level 24.5VRMS
70V/100V AMP OUT: Analog audio, Unbalanced 1CH, Max output level 70V/100VRMS
Audio Output Delay <1ms -
Transmission Distance 328ft / 100m (CAT6/6A/7) 100m
Control RS-232; Web GUI; API RS-232; Web GUI
ESD Protection IEC 61000-4-2: ±8kV (Air-gap discharge); ±4kV (Contact discharge) ±8kV (Air-gap discharge); ±4kV (Contact discharge)
Connections
Product 30W Amp 150W Amp
Input 1x MIC/LINE IN [6pin-3.5mm phoenix connector] 1x LINE IN [5pin-3.81mm Phoenix Connector]
Output 1x LINE OUT [6pin-3.5mm phoenix connector]
1x 4/8Ω AMP OUT [4pin-5.08mm locking phoenix connector] 		1x LINE OUT [5pin-3.81mm Phoenix Connector]
1x 4/8Ω AMP OUT [MSTB 2.5-GF-5.08, 4-pin locking phoenix, 5.08mm]
1x 70V/100V AMP OUT [MSTB 2.5-GF-5.08, 4-pin locking phoenix, 5.08mm]
Control 1x RS-232 [3pin-3.5mm phoenix connector, API commands control]
1x TRIGGER [2pin-3.5mm phoenix connector, high/Low level configurable to disable amp out]
1x DANTE/IP [RJ45 connector, PoE+/PD (Class 4 IEEE 802.3at)] [Dante/AES67, Web GUI and TCP/IP] 		1x RS-232/TRG [5pin-3.81mm phoenix connector] [TRG: 5-12V trigger input to turn on/off the amplifier]
1x LAN [RJ45 connector]
1x DANTE [RJ45 connector]
Mechanical
Product 30W Amp 150W Amp
Housing Metal Enclosure Metal enclosure
Color Turtle Aqua Turtle Aqua
Dimensions 180mm [W] × 118mm [D] × 23mm [H] 240mm [W] × 210mm [D] × 44mm [H]
Weight 713g 1.88kg
Power Supply (1) 24V/2A 4PIN Locking Power Supply
(2) PoE+/PD (Class 4 IEEE 802.3at) 		Input: AC100-240V 50/60Hz
Power Consumption 39W (Tested with 1k sine wave, audio amplifier output is connected to 4Ω resistance) 75W
Operating Temperature 0°C ~ 40°C / 32°F ~ 104°F 32 – 104° F / -20 – 60° C
Storage Temperature -20°C ~ 60°C / -4°F ~ 140°F -20°C ~ 60°C / -4°F ~ 140°F
Operating Humidity 20%~80% (relative humidity, non-condensing) 20% – 90% RH (no condensing)
Storage Humidity 10%~90% (relative humidity, non-condensing) 10%~90% (relative humidity, non-condensing)
Relative Humidity 20% – 90% RH (no condensing) 20% – 90% RH (no condensing)