Technical
Product Pro 2CH Analog Line Input Pro 2CH Analog Line Output Pro 2CH USB I/O
Input Two-channel balanced/unbalanced analog audio Dante® 2CH digital audio Interconverts between two-channel USB audio and Dante® 2CH digital audio
Output Dante® 2CH digital audio Two-channel balanced/unbalanced analog audio
USB Audio Class
–
 1.0/2.0-compatible
USB Audio Output
–
 Up to 192KHz@24bit
USB Audio Input
–
 Up to 96KHz@24bit
Control
Dante® Controller
Network Bandwidth
100M
Audio Latency
Configurable Dante® device latency (Supports 1, 2 or 5ms configurable using Dante® Controller)
Audio Formats LINE IN [Analog audio input, Balanced/unbalanced 2CH, Max input level +24dBu]
DANTE OUT [Digital audio output, PCM 2CH 44.1K-96KHz 16/24bit] 		DANTE IN [Digital audio input, PCM 2CH 44.1K-96KHz 16/24bit]
LINE OUT [Analog audio output, Balanced/unbalanced 2CH, Max output level +18dBu] 		USB IN [Digital audio input, PCM 2CH 44.1K-96KHz 16/24bit]
USB AUDIO OUT [Digital audio output, PCM 2CH 44.1K-192KHz 16/24bit]
DANTE IN/OUT [Digital audio output, PCM 2CH 44.1K-96KHz 16/24bit]
Input Impedance 20k Ohm balanced, 10k Ohm unbalanced
–
Line Input Level (Maximum) +24dBu (12.28Vrms) @balanced audio, +18dBu (6.15Vrms) @unbalanced audio
–
Output Impedance – 600 Ohm balanced, 300 Ohm unbalanced –
Line Output Level (Maximum) – +18dBu (6.15Vrms) @balanced audio, +12dBu (3.08Vrms) @unbalanced audio –
Frequency Response
20Hz to 20kHz (-/+0.5dB)
Dynamic Range
>100dB@0dBu, 1kHz A-weighted
Audio S/N Ratio
>100dB@0dBu, 1kHz A-weighted
Audio THD+N
< 0.01% at +4dBu, 1KHz
Audio Output Sync Delay
<10ms
ESD Protection
IEC 61000-4-2: ±8kV (Air-gap discharge) & ±4kV (Contact discharge)
Connections
Product Pro 2CH Analog Line Input Pro 2CH Analog Line Output Pro 2CH USB I/O
Input 1x CH1/CH2 LINE IN [6pin-3.81mm phoenix connector]
1x POWER [2-pin phoenix, 3.81mm] 		1x DANTE [RJ45 LAN, PoE]
1x POWER [2-pin phoenix, 3.81mm] 		1x USB-C [USB-C with USB 1.0/2.0, USB audio in/out, 12-pin female]
1x POWER [2-pin phoenix, 3.81mm]
1x DANTE [RJ45 LAN, PoE]
Output 1x DANTE [RJ45 LAN, PoE] 1x CH1/CH2 LINE OUT [6pin-3.81mm phoenix connector]
Mechanical
Product Pro 2CH Analog Line Input Pro 2CH Analog Line Output Pro 2CH USB I/O
Housing
Metal enclosure
Color
Turtle Aqua
Dimensions
120mm [W] × 47mm [D] × 26mm [H]
Weight 186g 94g 188g
Power Supply
PoE: PoE IEEE 802.3af Class 0
DC: 12V
Power Consumption
2W (MAX)
Operating Temperature
32 – 104°F / -20 – 60°C
Relative Humidity
20% – 90% RH (no condensing)

Dante Pro Converters.

2CH Line In
2CH Analog Line Input Converter

2CH USB I/O
2CH USB-C Input/Output Converter

2CH Line Out
2CH Analog Line Output Converter