- Products
Dolby Atmos Dante Encoders
Dante Microphone Preamps
Dante Wallplates
Dante Pro Converters
Dante Amplifiers
Video Walls and Multiviewers
- News
- Case Studies
- Support
- Where To Buy
- Contact Us
| HDMI | HDMI 2.0b |
|---|---|
| HDCP | HDCP 2.3 |
| USB | USB 2.0 |
| Video Bandwidth | 18Gbps |
| Video Resolution | Up to 4K@60Hz (4:4:4 8bit) |
| Color Space | RGB, YCbCr 4:4:4, YCbCr 4:2:2, YCbCr 4:2:0 |
| Color Depth | 8/10/12bit |
| HDR | HDR, HDR10, HDR10+, Dolby Vision, HLG |
| Audio Formats |
USB-C/HDMI passthrough: LPCM 2.0/5.1/7.1CH, Dolby TrueHD, Dolby Atmos, DTS-HD Master Audio and DTS:X |
| Transmission Distance |
4K60Hz (4:4:4 8bit) signal up to 130ft/40m 4K30Hz (4:4:4 8bit) signal up to 230ft/70m with CAT6A/7 cable USB 2.0 pass through up to 230ft/70m, connecting to 4 USB devices to the receiver |
| ESD Protection | IEC 61000-4-2: ±8kV (Air-gap discharge) & ±4kV (Contact discharge) |
| Transmitter | |
|---|---|
| Front Panel |
1x CHARGE [USB Type C, 24-pin female] 1x USB-C IN [USB Type C, 24-pin female] 2x USB 2.0 DEVICES [USB Type A, 4-pin female] |
| Rear Panel |
1x SERVICE [USB-C with USB 2.0 only, 12-pin female, firmware upgrade port] 1x RS-232 [3-pin phoenix with 3.5mm pitch] 1x HDBaseT OUT [RJ45 connector, 24V PoC] 1x Power LED [Red LED, Power indicator] 1x DC 24V [24V/2.7A, 19mm locking connector] |
| Side Panel | 1x PoC ON/OFF [1-pin DIP switch, 24V PoC ON/OFF selection] |
| Receiver | |
| Front Panel |
1x HDMI OUT [HDMI Type A, 19-pin female] 1x USB 2.0 DEVICES [USB Type C, 12-pin female] 3x USB 2.0 DEVICES [USB Type A, 4-pin female] |
| Rear Panel |
1x SERVICE [USB-C with USB 2.0 only, 12-pin female, firmware upgrade port] 1x RS-232 [3-pin phoenix with 3.5mm pitch] 1x HDBaseT IN [RJ45 connector, 24V PoC] 1x Power LED [Red LED, Power indicator] 1x DC 24V [24V/2.7A, 19mm locking connector] |
| Side Panel | 1x PoC ON/OFF [1-pin DIP switch, 24V PoC ON/OFF selection] |
| Housing | Metal |
|---|---|
| Color | Turtle Aqua |
| Dimensions | Transmitter/Receiver: 120mm [W] × 113mm [D] × 25.5mm [H] |
| Weight | Transmitter: 353g; Receiver: 352g |
| Power Supply |
Input: AC 100 – 240V 50/60Hz Output: DC 24V/2.7A (US/EU standard, CE/FCC/UL certified) |
| Power Consumption |
TX/RX with full USB devices: 51.36W TX/RX without USB devices: 10.08W |
| Operating Temperature | 32°F – 104°F / 0°C – 40°C |
| Storage Temperature | -4°F – 140°F / -20°C – 60°C |
| Operating Humidity | 20% – 80% relative humidity, non-condensing |
| Storage Humidity | 10% – 90% relative humidity, non-condensing |
