2CH Analog Line Input Adapter
2CH Analog Line Output Adapter
2CH Analog XLR Input Adapter
2CH Analog XLR Output Adapter
2CH USB I/O Adapter
2CH Bluetooth Input Adapter
HDP-AUD2LEN.152.6
HDP-AUD2LEN.152.5
HDP-AUD2LEN.152.4
HDP-AUD2LEN.152.3

Dante® 2CH Analog Line Input Adapter with Gain Controls

Desription

Unlock the power of pristine digital audio with the Dante® 2CH Line Input Adapter. Built on the cutting-edge Dante® Ultimo 2×2 solution, this adapter converts two-channel balanced or unbalanced analog audio into crystal-clear Dante® digital audio.

With 5-level sensitivity adjustment for analog inputs, you can tailor your sound with ease. Additionally, the adapter is powered via USB-C or PoE, ensuring flexible and convenient power options. Perfect for professional-grade audio integrations that demand the best.

Technical

Input
Output
Control
Network Bandwidth
Audio Latency
Audio Formats

Audio Parameters







ESD Protection

Two-channel balanced/unbalanced analog audio
Dante® 2CH digital audio
Dante® Controller
100M
Configurable Dante® device latency (Supports 1, 2 or 5ms configurable using Dante® Controller)
LINE IN [Analog audio input, Balanced/unbalanced 2CH, Max input level +24dBu]
DANTE OUT [Digital audio output, PCM 2CH 44.1K-96KHz 16/24bit]
LINE IN
Input Impedance: 20k Ohm balanced, 10k Ohm unbalanced
Line Input Level (Maximum): +24dBu (12.28Vrms) @balanced audio, +18dBu (6.15Vrms) @unbalanced audio
Frequency Response: 20Hz to 20kHz (-/+0.5dB)
Dynamic Range: >100dB@0dBu, 1kHzA-weighted
Audio S/N Ratio: >100dB@0dBu, 1kHzA-weighted
Audio THD+N: < 0.01% at +4dBu, 1KHz
Audio Output Sync Delay: <10ms
IEC 61000-4-2: ±8kV (Air-gap discharge) & ±4kV (Contact discharge)

Connections

INPUT

OUTPUT

1x CH1/CH2 LINE IN [6pin-3.5mm phoenix connector]
1x POWER [USB-C power and firmware update port,12-pin female]
1x DANTE [RJ45 LAN, PoE]

Mechanical

Housing
Color
Dimensions
Weight
Power Supply


Power Consumption
Operating Temperature
Relative Humidity

Plastic enclosure
Black/Green
115mm [W] x 40mm [D] x 28mm [H]
94g
PoE: PoE IEEE802.3af Class 0
USB: 5V/500mA

2W(MAX)
32 – 104° F / -20 – 60° C
20% – 90% RH (no condensing)