2CH Analog Line Input Adapter
2CH Analog Line Output Adapter
2CH Analog XLR Input Adapter
2CH Analog XLR Output Adapter
2CH USB I/O Adapter
2CH Bluetooth Input Adapter
HDP-AUD2XDE.153.5
HDP-AUD2XDE.153.4
HDP-AUD2XDE.153.3

Dante® 2CH Analog XLR Output Adapter with Gain Controls

Desription

Unlock the power of pristine digital audio with the Dante® 2CH digital audio to two-channel XLR analog audio. Built on the cutting-edge Dante® Ultimo 2×2 solution, this adapter adapter converts crystal-clear Dante® digital audio into two-channel balanced or unbalanced analog XLR.

With 5-level sensitivity adjustment for analog outputs, you can tailor your sound with ease. Additionally, the adapter is powered via USB-C or PoE, ensuring flexible and convenient power options. Perfect for professional-grade audio integrations that demand the best.

Technical

Input
Output
Control
Network Bandwidth
Audio Latency
Audio Formats

Audio Parameters







ESD Protection

Dante® 2CH digital audio
Two-channel balanced/unbalanced XLR analog audio
Dante® Controller
100M
Configurable Dante® device latency (Supports 1, 2 or 5ms configurable using Dante® Controller)
DANTE IN [Digital audio input, PCM 2CH 44.1K-96KHz 16/24bit]
XLR OUT [Analog audio output, Balanced/unbalanced 2CH, Max output level +18dBu]
XLR OUT
Output Impedance: 600 Ohm balanced, 300 Ohm unbalanced
Line Output Level (Maximum): +18dBu (6.15Vrms) @balanced audio, +12dBu (3.08Vrms) @unbalanced audio
Frequency Response: 20Hz to 20kHz (-/+0.5dB)
Dynamic Range: >100dB@0dBu, 1kHzA-weighted
Audio S/N Ratio: >100dB@0dBu, 1kHzA-weighted
Audio THD+N: < 0.01% at +4dBu, 1KHz
Audio Output Sync Delay: <10ms
IEC 61000-4-2: ±8kV (Air-gap discharge) & ±4kV (Contact discharge)

Connections

INPUT

OUTPUT

1x DANTE [RJ45 LAN, PoE]
1x POWER [USB-C power and firmware update port,12-pin female]
1x CH1/CH2 LINE OUT [XLR female plug, with 30cm cable]

Mechanical

Housing
Color
Dimensions
Weight
Power Supply


Power Consumption
Operating Temperature
Relative Humidity

Plastic enclosure
Black/Green
115mm [W] x 40mm [D] x 28mm [H]
173g
PoE: PoE IEEE802.3af Class 0
USB: 5V/500mA

2W(MAX)
32 – 104° F / -20 – 60° C
20% – 90% RH (no condensing)