2CH Analog Line Input Adapter
2CH Analog Line Output Adapter
2CH Analog XLR Input Adapter
2CH Analog XLR Output Adapter
2CH USB I/O Adapter
2CH Bluetooth Input Adapter
HDP-AUD22UC.155.6
HDP-AUD22UC.155.5
HDP-AUD22UC.155.4
HDP-AUD22UC.155.3

Dante® 2CH USB I/O Adapter

Desription

Experience flawless bi-directional conversion between two-channel USB audio and Dante® 2CH digital audio. This versatile adapter is USB audio device class 1.0/2.0 compatible, supporting USB output up to 24bit/192KHz and input up to 24bit/96KHz. With Dante® audio sampling rates of 24bit at 44.1, 48, 88.2, and 96KHz, it delivers exceptional audio quality. The configurable Dante® audio delay (1, 2, or 5 milliseconds) ensures precision in any setup. Power by PoE or USB-C, for maximum powering flexibility.

Technical

Input/Output
USB Audio Class
USB Audio Output
USB Audio Input
Control
Network Bandwidth
Audio Latency
Audio Formats


Audio Parameters





ESD Protection

Interconverts between two-channel USB audio and Dante® 2CH digital audio
1.0/2.0-compatible
up to 192KHz@24bit
up to 96KHz@24bit
Dante® Controller
100M
Configurable Dante® device latency (Supports 1, 2 or 5ms configurable using Dante® Controller)
USB IN [Digital audio input, PCM 2CH 44.1K- 96KHz 16/24bit]
USB AUDIO OUT [Digital audio output, PCM 2CH 44.1K-192KHz 16/24bit]
DANTE IN/OUT [Digital audio output, PCM 2CH 44.1K-96KHz 16/24bit]
USB IN
Frequency Response: 20Hz to 20kHz (-/+0.5dB)
Dynamic Range: >100dB@0dBu, 1kHzA-weighted
Audio S/N Ratio: >100dB@0dBu, 1kHzA-weighted
Audio THD+N: < 0.01% at +4dBu, 1KHz
Audio Output Sync Delay: <10ms
IEC 61000-4-2: ±8kV (Air-gap discharge) & ±4kV (Contact discharge)

Connections

INPUT/OUTPUT

1x USB-C [USB-C with USB 1.0/2.0, USB audio in/out, 12-pin female]
1x POWER [USB-C power and firmware update port,12-pin female]
1x DANTE [RJ45 LAN, PoE]

Mechanical

Housing
Color
Dimensions
Weight
Power Supply


Power Consumption
Operating Temperature
Relative Humidity

Plastic enclosure
Black/Green
115mm [W] x 40mm [D] x 28mm [H]
94g
PoE: PoE IEEE802.3af Class 0
USB: 5V/500mA

2W(MAX)
32 – 104° F / -20 – 60° C
20% – 90% RH (no condensing)