2CH Analog Line Input Adapter
2CH Analog Line Output Adapter
2CH Analog XLR Input Adapter
2CH Analog XLR Output Adapter
2CH USB I/O Adapter
2CH Bluetooth Input Adapter
HDP-AUD2BEN.149.6
HDP-AUD2BEN.149.5
HDP-AUD2BEN.149.3

Dante® 2CH Bluetooth Input Adapter

Desription

This adapter enables seamless conversion from two-channel Bluetooth audio to Dante® 2CH digital audio, supporting Bluetooth V5.1 with SBC, AAC, APTX, APTX-LL, and APTX-HD codecs for high-fidelity audio up to 24-bit/192kHz. The Dante® audio output is sampled at 24-bit/48kHz, ensuring exceptional sound quality. With configurable Dante® audio delay options of 1, 2, or 5 milliseconds, this adapter delivers precise, low-latency performance. Powered via PoE or USB-C, it offers flexible power solutions for any professional audio setup.

Technical

Input
Output
Bluetooth
Control
Network Bandwidth
Audio Latency
Audio Formats

Audio Parameters




ESD Protection

Two-channel Bluetooth audio
Dante® 2CH digital audio
V5.1, SBC/AAC/APTX/APTX-LL/APTX-HD, up to 192KHz@24bit
Dante® Controller
100M
Configurable Dante® device latency (Supports 1, 2 or 5ms configurable using Dante® Controller)
Bluetooth IN [Digital audio input, PCM 2CH 44.1K-192KHz 16/24bit]
DANTE OUT [Digital audio output, PCM 2CH 48KHz 16/ 24bit]
Frequency Response: 20Hz to 20kHz (-/+0.5dB)
Dynamic Range: >100dB@0dBu, 1kHzA-weighted
Audio S/N Ratio: >100dB@0dBu, 1kHzA-weighted
Audio THD+N: < 0.01% at +4dBu, 1KHz
Audio Output Sync Delay: <10ms
IEC 61000-4-2: ±8kV (Air-gap discharge) & ±4kV (Contact discharge)

Connections

INPUT

OUTPUT

1x Bluetooth Input [Wireless]
1x POWER [USB-C power and firmware update port,12-pin female]
1x DANTE [RJ45 LAN, PoE]

Mechanical

Housing
Color
Dimensions
Weight
Power Supply


Power Consumption
Operating Temperature
Relative Humidity

Plastic enclosure
Black/Green
115mm [W] x 40mm [D] x 28mm [H]
94g
PoE: PoE IEEE802.3af Class 0
USB: 5V/500mA

2W(MAX)
32 – 104° F / -20 – 60° C
20% – 90% RH (no condensing)