Pro 2CH Analog Line Input Converter
Pro 2CH Analog Line Output Converter
Pro 2CH USB I/O Converter
dec (3)
dec (4)
dec (2)
enc (1)

Dante® Pro 2CH Analog Line Output Adapter with Gain Controls

Desription

Unlock the power of pristine digital audio with the Dante® 2CH Line Output Adapter. Built on the cutting-edge Dante® Ultimo 2×2 solution, this adapter converts crystal-clear Dante® digital audio into two-channel balanced or unbalanced analog audio.

Technical

Input
Output
Control
Network Bandwidth
Audio Latency
Audio Formats

Audio Parameters







ESD Protection

Dante® 2CH digital audio
Two-channel balanced/unbalanced analog audio
Dante® Controller
100M
Configurable Dante® device latency (Supports 1, 2 or 5ms configurable using Dante® Controller)
DANTE IN [Digital audio input, PCM 2CH 44.1K-96KHz 16/24bit]
LINE OUT [Analog audio output, Balanced/unbalanced 2CH, Max output level +18dBu]
LINE OUT
Output Impedance: 600 Ohm balanced, 300 Ohm unbalanced
Line Output Level (Maximum): +18dBu (6.15Vrms) @balanced audio, +12dBu (3.08Vrms) @unbalanced audio
Frequency Response: 20Hz to 20kHz (-/+0.5dB)
Dynamic Range: >100dB@0dBu, 1kHzA-weighted
Audio S/N Ratio: >100dB@0dBu, 1kHzA-weighted
Audio THD+N: < 0.01% at +4dBu, 1KHz
Audio Output Sync Delay: <10ms
IEC 61000-4-2: ±8kV (Air-gap discharge) & ±4kV (Contact discharge)

Connections

INPUT

OUTPUT

1x DANTE [RJ45 LAN, PoE]
1x POWER [2-pin phoenix, 3.81mm]
1x CH1/CH2 LINE OUT [6pin-3.5mm phoenix connector]

Mechanical

Housing
Color
Dimensions
Weight
Power Supply

Power Consumption
Operating Temperature
Relative Humidity

Metal enclosure
Turtle Aqua
120mm [W] x 47mm [D] x 26mm [H]
94g
PoE: PoE IEEE802.3af Class 0
USB: 5V/500mA

2W(MAX)
32 – 104° F / -20 – 60° C
20% – 90% RH (no condensing)

1.
2.
3.
4.

DC 12V power input port
2 channel analog audio output ports, supporting balanced and unbalanced audio
Dante digital audio output port. Connect to the Network Switch through RJ45 line, supporting PD power supply.
Used for audio input gain adjustment, respectively +18dBu, 0dBu (default), -10dBV.