Pro 2CH Analog Line Input Converter
Pro 2CH Analog Line Output Converter
Pro 2CH USB I/O Converter
enc (3)
enc (4)
enc (2)
enc (1)

Dante® Pro 2CH Analog Line Input Adapter with Gain Controls

Desription

Unlock the power of pristine digital audio with the Dante® 2CH Line Input Adapter. Built on the cutting-edge Dante® Ultimo 2×2 solution, this adapter converts two-channel balanced or unbalanced analog audio into crystal-clear Dante® digital audio.

With 3-level sensitivity adjustment for analog outputs, you can tailor your sound with ease. The Dante Pro Dual Line INput is in a rugged metal chassis and can be powered PoE or 12V DC using the phoenix connectors.

Technical

Input
Output
Control
Network Bandwidth
Audio Latency
Audio Formats

Audio Parameters







ESD Protection

Two-channel balanced/unbalanced analog audio
Dante® 2CH digital audio
Dante® Controller
100M
Configurable Dante® device latency (Supports 1, 2 or 5ms configurable using Dante® Controller)
LINE IN [Analog audio input, Balanced/unbalanced 2CH, Max input level +24dBu]
DANTE OUT [Digital audio output, PCM 2CH 44.1K-96KHz 16/24bit]
LINE IN
Input Impedance: 20k Ohm balanced, 10k Ohm unbalanced
Line Input Level (Maximum): +24dBu (12.28Vrms) @balanced audio, +18dBu (6.15Vrms) @unbalanced audio
Frequency Response: 20Hz to 20kHz (-/+0.5dB)
Dynamic Range: >100dB@0dBu, 1kHzA-weighted
Audio S/N Ratio: >100dB@0dBu, 1kHzA-weighted
Audio THD+N: < 0.01% at +4dBu, 1KHz
Audio Output Sync Delay: <10ms
IEC 61000-4-2: ±8kV (Air-gap discharge) & ±4kV (Contact discharge)

Connections

INPUT

OUTPUT

1x CH1/CH2 LINE IN [6pin-3.5mm phoenix connector]
1x POWER [2-pin phoenix, 3.81mm]
1x DANTE [RJ45 LAN, PoE]

Mechanical

Housing
Color
Dimensions
Weight
Power Supply

Power Consumption
Operating Temperature
Relative Humidity

Metal enclosure
Turtle Aqua
120mm [W] x 47mm [D] x 26mm [H]
186g
PoE: PoE IEEE802.3af Class 0
USB: 5V/500mA
2W(MAX)
32 – 104° F / -20 – 60° C
20% – 90% RH (no condensing)

1.
2.
3.
4.

DC 12V power input port
2 channel analog audio input ports, supporting balanced and unbalanced audio
Dante digital audio output port. Connect to the Network Switch through RJ45 line, supporting PD power supply.
Used for audio input gain adjustment, respectively +18dBu, 0dBu (default), -10dBV.